The reason why safety capacitors are called safety regulations refers to their use in situations where the failure of the capacitor will not cause electric shock or endanger personal safety.
NTC thermistors, which stand for Negative Temperature Coefficient thermistors, are resistors whose resistance decreases as the temperature increases. They are made of semiconductor materials with a large negative temperature coefficient.
A varistor (MOV) and a thermistor (NTC) are both types of electronic components that exhibit varying electrical properties based on changes in their surrounding environment.
The capacitor shell or outer sealing material is marked with a string or graphic symbol related to the capacitor. The correct identification of these contents is helpful for us to correctly choose and use the capacitor.
The Y capacitor is a capacitor connected between the AC input lines L-PE and N-PE respectively. It is similar to the English letter Y, so it is named Y capacitor.
When there comes the question to choosing the right capacitor for a project, it’s quite important to know the differences between film capacitors and ceramic capacitors.
We all know that ceramic capacitors come in various dielectric materials. Different dielectric types have distinct polarization characteristics, leading to varying response speeds and polarization rates to changes in the electric field.
UF Capacitors produce varistors as protection components, the varistors have three level, standard type, high energy type, and power meter level. Power meters need to use lots of varistors.
A capacitor is an electronic component that stores and releases electrical energy. It consists of two conductive plates separated by a dielectric material, which prevents direct contact between the plates.
The MMKP82 capacitor was first developed by Faratronic Co., Ltd., a leading company in the field of thin film capacitors in China.
When we look at almost any power supply application circuit there will be capacitors on the output of the power supply located at the load.
TVS Diodes and Metal-Oxide Varistors (MOVs) are both commonly used components for transient voltage protection in electronic circuits, but they have some key differences.
The ratio of the charged quantity Q of a capacitor to the voltage U between the two poles of the capacitor is called the capacitance of the capacitor.
UF Capacitors factory have many different kinds of capacitors for for engineer’s selection. How to choosing the right capacitors? Please check below points.
High voltage ceramic capacitors, commonly used in power systems, are typically used in products such as measurement, energy storage, and voltage division in power systems.